| 1 | Rotating Bur Holder, 1/4″, 1/8″ holes & cup |
| 1 | 3M Radial Bristle Disc- 6-pk, 3/4″, 80 grit |
| 3 | Sanding Bands, 1/2″ x 1/2″, 60 grit |
| 3 | Sanding Bands, 1/2″ x 1/2″, 80 grit |
| 3 | Sanding Bands, 1/2″ x 1/2″, 120 grit |
| 3 | Sanding Bands, 1/2″ x 1/2″, 220 grit |
| 1 | Vanadium Steel Cutter, Knife Edge, 3/8″ dia. x 9/16″ long, 1/8″ Shank |
| 1 | CeramCut Blue Stone Point, Round Top Taper, 1/8″ dia. x 1/2″ long with 3/32″ Shank, 120 Grit |
| 1 | CeramCut Blue Stone Point, Flat Top Taper, 3/32″ dia. x 3/8″ long with 1/8″ Shank, 120 Grit |
| 1 | CeramCut Blue Stone Point, Ball Nose, 1/8″ dia. x 1/2″ long with 1/8″ Shank, 120 Grit |
| 1 | Typhoon, Cylinder, Coarse, Smooth End, 9/16″ x 3/4″, 1/4″ Shank |
| 1 | Typhoon, Round, Fine, 5/16″ x 5/16″, 1/8″ Shank |
| 1 | Typhoon Ball Nose, Coarse, 5/16″ x 1/2″, 1/8″ Shank |
| 1 | Mandrel, Screw Type, 3/32″ shank X 1/16″ arbor screw |
| 1 | Mandrel. Split Type, Sandpaper, 1/8″ shank |
| 1 | Plated Diamond Point, Ball, 4.3mm dia. x 3.8mm long, 2.35mm (3/32″) Shank, 125-180 Micron (120-200 Grit) |
| 1 | Plated Diamond Point, Cylinder, 4.0mm dia. x 8.0mm long, 2.35mm (3/32″) Shank, 125-180 Micron (120-200 Grit) |
| 1 | Rubber Sanding Drum Mandrel, 1/2″ x 1/2″, 1/8″ Shank |
| 1 | V Series Point, 1/8″ shank, Cylinder, 3/8 dia. X 3/8 h, 46/60 |
Saburr-Tooth 2" Wheel Flat Face EX-Coarse
$42.64
Typhoon Carbide Bur 1/8" Shank -Long Taper (Coarse) KB18118
$27.05
Accessory Kit AKWK53
$178.98
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.